Easy Tips to Fix Netgear Orbi Router Keeps Rebooting Issue

August 9, 2023August 9, 2023 remoremobyers

Rebooting a networking device is the ultimate solution when it comes to fixing technical issues related to it. But, what if this becomes an issue in itself? Yes, you got that right. These days, many users are reporting that they are tired of seeing their Netgear Orbi router reboot or restart over and over again. They are experiencing this issue despite setting up their devices successfully using the Netgear Orbi app.

Sadly, in case you are one of those users who are stuck with the same issue, then reading the troubleshooting tips mentioned below will be able to help you out.

[Fixed] Netgear Orbi Router Keeps Rebooting Issue

Sync the Orbi Devices Again

Prior to doing anything else, it is recommended that you sync the Orbi devices, i.e. the router and the satellite again. Perhaps, your devices are not synced properly due to which you are experiencing the issue at hand. Considering this, you need to press the Sync button on the satellite and then the router. For your information, the order in which you do this will not impact how well your devices will get synced.

Bring the WiFi Devices Closer

Is there too much space between the Netgear Orbi router and the existing modem? Well then, you just came across the second reason why your networking device keeps rebooting. To get rid of this issue, you need to reduce the distance between the router and the existing modem so that the signals that they are transmitting are able to get propagated properly in every nook and cranny of your house.

Clean the Ethernet Ports

Maybe the Ethernet ports into which the cable is connected are dusty. To take care of the problem, you need to clean the ports. You can do this with the help of an ear bird or a clean cloth. However, make sure that both these items are not wet from any point. Otherwise, rather than fixing the Netgear Orbi router keeps rebooting issue; you will end up sending an invitation to more technical issues to trouble you.

Change the Connection Source

Have you connected the devices with a cable? Well, we are assuming that the connection established through it is loose. Bearing this in mind, you need to change the source of connection to connect the networking devices. We would personally suggest that you join the devices with the assistance of a wireless source of connection. But, at the same time, ensure that the distance between them is safe.

Reset the Netgear Orbi Router

In case not even one of the hacks given above helped you to stop your device from rebooting continuously, then you are left with no other option than to restore it to its factory default mode, as in, to its original settings. The same can be done if you press the Reset button located on the device using an oil pin or a paper clip and hold on for some time. Then, set up the device from scratch using the Netgear Orbi router login credentials.

In Conclusion

With the last hack, the article written on how to troubleshoot the Netgear Orbi router keeps rebooting issue comes to an end here. We hope that after following the tips given above, you will be able to resolve the issue that you were experiencing with your device. In case, you do, we do not mind a few words of gratitude. You can drop them if you make use of the comment section given below.
Apart from sharing your feedback, if you have anything else to say to your fellow readers, you can do the same by using the same platform. You can trust us with that.