My Netgear Nighthawk Router Won’t Update. How to Fix It?
Netgear Nighthawk routers are the most preferred networking devices by tech geeks. But, installing a WiFi router is not the only thing that users must do to access a high-speed internet connection. One also needs to go through the router firmware update process to get the maximum output from the home network. In other words, it is all about maintaining the router. But, there comes a situation when the Netgear Nighthawk router won’t update. What needs to be done in that case? This post focuses on that only. So, stick to reading.
Fixed: Nighthawk Router Won’t Update
Use the Correct Steps
More than 65% of Nighthawk router users are unable to update their devices because of the wrong procedure. Perhaps, you did the same. Know that you need to download the firmware file of the router first and upload it on the routerlogin.net setup wizard. Don’t know how to do that? The steps given below will help you out.
Firstly, download the router’s firmware file via an internet browser and save it.
Access the router’s admin panel via its default URL and log in to it.
Once you reach the Netgear Genie dashboard, click the Firmware Update tab.
Thereafter, upload the file you downloaded earlier and let the process get completed.
Do Not Use Outdated Browser
Your Netgear Nighthawk router won’t update if you are not making use of an up-to-date version of the web browser. Remember that whether you are using Google Chrome or Microsoft Edge, the web browser you are using should not be outdated. Thus, navigate to its Settings panel and do the following:
Install its latest version in case it is available.
Clear out the cache, cookies, and browsing history.
Download the Correct File
The firmware update file is the most important part of the Netgear Nighthawk router update process. It means it demands special care when it comes to carrying out a router firmware update. But, it seems that did not pay heed. While downloading the firmware file of your Netgear router, you are supposed to:
Make sure that the firmware file is downloaded completely.
Ensure that you are not downloading the firmware file of the router model other than your own.
Keep in mind to upload the file you downloaded only. Uploading the file with some other extension can damage the hardware of your Netgear Nighthawk router.
Restart when your Nighthawk Router Won’t Update
Sometimes, not the aforementioned reasons, but technical glitches are the culprit behind the router firmware update failure. In that scenario, you ought to give a fresh start to your Nighthawk router. All that you need to do is:
Unhinge the power adapter of your router from the wall socket.
Let the router stay idle for a few moments.
Connect the power adapter back to the outlet and switch on your router.
Also read:- Netgear Nighthawk Router Issues
Avoid Background Activities
The Nighthawk router firmware won’t update if you are impatient enough and do not let the process complete. In other words, you might be busy playing games while the firmware update process was in progress or watching an online movie on a web browser. Well, whatever you were doing, you were not supposed to do that. Your main focus should be on the firmware update tab until the process does not get finished. Apart from this, ensure that you do not disconnect your Netgear Nighthawk router from the main gateway (modem) or power it down when the firmware is being updated.
Summing Up
With the last tip, we will now focus on wrapping up the post written with the intention of helping you fix the Netgear Nighthawk router won’t update issue. Apart from the aforementioned tips, you need to ensure that you use the correct Netgear router login credentials to log in to the router and there is a consistent connection between your WiFi devices (Netgear router and modem).
Your router must be fetching enough electricity from the wall socket and must be placed at an optimal location. We give you a word that if you take care of these things, nothing will stop you from getting the router’s firmware updated. So, what are you waiting for? Restart the Netgear router firmware update process and let your router get equipped with the newest features.